Our stone worktop prices start at 166 €/m², and a typical kitchen worktop falls between on request. The prices are the same as on our factory’s home market in Estonia — which is why they are often clearly below the general price level in Finland. On this page you can see the real stock prices by material and brand.
The most affordable stock stones are granite — the most durable material is also the cheapest.
Our own factory in Estonia and slabs direct from the manufacturers — no middlemen’s margins.
Tell us the dimensions and preferred shade — you get the total price before ordering, no surprises.
The €/m² price of every stock stone is shown openly in our catalogue.
The ‘from’ price is the price per m² of the cheapest stock shade; the range shows where most of the selection falls.
| Material | Price from | Typical range |
| Granite worktop | from 166 €/m² | on request |
| Quartz worktop | from 195 €/m² | on request |
| Ceramic worktop | from 233 €/m² | on request |
| Limestone worktop | from 182 €/m² | on request |
| Marble worktop | from 240 €/m² | on request |
| Brand | Price from | Shades in stock |
| Caesarstone | from 657 €/m² | 32 |
| Dekton | from 546 €/m² | 43 |
| Technistone | from 195 €/m² | 67 |
| Laminam | from 233 €/m² | 75 |
| Silestone | from 546 €/m² | 30 |
The biggest single factor. Within the same material a standard shade can cost less than half the price of a design series — which is why the ranges are wide.
20 mm is the most affordable starting point; 30 mm and a thickened front edge raise the price. A straight edge finish is the cheapest, profiled edges are added as machining.
Sink and hob cut-outs, tap holes and chamfers are priced as CNC machining — you will see them itemised in the quote.
Laser measuring, freight to Finland and installation are included in the quote — you see the total price before ordering, no surprises on site.
Dekton is Dekton and Silestone is Silestone no matter who cuts the slab. The difference comes from the chain: we buy slabs in full batches directly from the manufacturers, machine them in our own factory in Estonia and install them with our own team in Finland. The importer’s and subcontractors’ margins are cut out — and Estonia’s cost level does the rest.
That is why our prices are often clearly below the general price level in Finland, even though the material, warranty and installation quality are the same. We don’t sell the cheapest possible — we sell the same quality at factory price. Comparing is easy: Read why a stone worktop from Estonia is more affordable or send us the quote you received, and we will put ours next to it. Still comparing materials? Also read our stone worktop vs laminate comparison.
An affordable stone worktop does not mean a compromise: these are the same stock stones, machined and installed in the same way as the premium series.
| Stone | Material | Price |
| Alma Grey | granite | from 182 €/m² |
| Grigio Cristallo | granite | from 166 €/m² |
| Reval | limestone | from 182 €/m² |
| Caesarstone Shitake | quartz | from 448 €/m² |
| Dekton Sirius | ceramic | from 568 €/m² |
| Bianco Sardo | granite | from 176 €/m² |
| Steel Grey | granite | from 180 €/m² |
| Technistone Starlight Black | quartz | from 182 €/m² |
Standard-shade granite (from 166 €/m²) is the most affordable and at the same time the most durable natural stone — unlike quartz, it withstands heat.
Technistone and Caesarstone shades offer the look of premium brands at a 30–50 % softer price.
A straight edge finish on a 20 mm slab is the most affordable combination — and the most popular look right now.
Cutting the worktop and splashback from the same slab reduces waste and unifies the look.
Stock stones start at 166 €/m², and most kitchen worktops fall between on request including machining. The final price depends on the slab series, thickness, edge finish and cut-outs — you get the total price in a quote within a day – the final price is confirmed after measuring.
Our most affordable stock stones are the granites Alma Grey and Grigio Cristallo (from 166 €/m²). In quartz the most affordable is Caesarstone Shitake (from 233 €/m²) and in ceramic Dekton Sirius (from 546 €/m²).
Quartz worktops start at 195 €/m² and the typical range is on request. The most popular light marble patterns sit at the top of the range. You can see the prices of the whole selection on the quartz worktop page and in the catalogue.
We buy slabs in full batches directly from the manufacturers, machine them in our own factory in Estonia and install them with our own team — there are no middlemen’s margins, and Estonia’s cost level keeps the labour price moderate. The material and quality are the same.
Laser measuring, delivery and installation in Finland are always included in the quote, so you see the total price before ordering. Delivery and installation in Finland — 14 working days from drawing approval.
Tell us the dimensions of your project and your preferred shades, and you get the total price within a day — including measuring and installation. The final price is confirmed after measuring.
The same data as in our AI database (stoneks.fi/data), updated 2026.
Service areas: HelsinkiEspooVantaaTampereTurku and all of Finland.
Stoneks OÜ ·+372 56 920 370 (weekdays 9–18, in Finnish and English) ·sales@stoneks.com ·Get a quote
