STONE CARE KIT
A neutral and multifunctional cleaning agent that is excellent for cleaning stone surfaces.
You do not need to mix the product with water, it is ready to use immediately. It is easy to use; spray the agent on the stone surface and polish with the white cloths that come with it. When you have dried and the surface is clean, it remains to rinse away any residues of the agent with water.
AQUA SEAL
Water-based stain remover
Acqua Seal is an agent for stone slabs that counteracts the absorption of water- and oil-based substances. Some natural stones (limestone, marble) are nevertheless sensitive
for acidic etching and we therefore recommend that you always wipe off spills immediately to minimize the risk of staining.
Use:
apply Acqua Seal to your most used stone surfaces every 4-6 months. Before application, it is important that the stone is clean and dry. The agent must then work for 24-48 hours before using the surface again. If the surface is very absorbent, you can apply another layer of the stain remover after an hour.
The effect of the product is ensured by correct application according to the instructions and subsequent correct maintenance of the surface, without using solvents, acid or alkaline detergents. Ensure that the product is effective by following the instructions for the agent and by general maintenance of the surface. Do not use solvents, acid or alkaline detergents.