Laminam worktops — 75 colours — from 175 € / m²
Laminam is the Italian pioneer of large-format ceramic, whose I Naturali series reproduces real marble patterns on a ceramic surface. Ceramic handles heat, acids and UV — and we stock 75 colours.
Real marble looks
I Naturali patterns are scanned from real stone blocks.
Handles heat
A ceramic surface does not care about a hot pan.
75 colours in stock
Our second-widest range — marbles, concretes and solids.
Thin and light
Large-format slabs enable seamless surfaces and light structures.
Ceramic that looks like marble and behaves better
Laminam makes large-format ceramic in Italy, and its slab sizes and thin profiles changed the whole industry. The ceramic surface is completely dense: it absorbs nothing, tolerates citric acid and detergents, and a hot pot leaves no mark.
The best-known series is I Naturali, where patterns of real marble blocks — Noir Desir, Calacatta, Nero Greco — are reproduced on a ceramic slab. You get the marble look in a kitchen where real marble would be too delicate.
We stock 75 Laminam colours in polished (Lucidato) and matte finishes. Thanks to its light weight, Laminam also works for cabinet fronts, wall cladding and fireplace surrounds.
All Laminam worktops in stock
Filter valikoimaa värin, paksuuden ja hinnan mukaan — hinta €/m² näkyy jokaisen kiven kortilla. Showroomissa voit vertailla sävyjä kokonaisina levyinä.
Why choose Laminam
Marble without the risk
I Naturali patterns give real stone looks on a surface that neither stains nor etches.
Heat resistance
Hot cookware straight on the surface — a clear advantage over quartz.
Acid resistance
Lemon, vinegar and cleaners will not dull the surface.
Seamless surfaces
Worktop and splashback cut from the same slab with a continuous pattern.
Key facts
| Manufacturer | Laminam, Italy |
| Material | Large-format technical ceramic |
| Colours in stock | 75 |
| Thicknesses | 12 mm for worktops; thinner panels for splashbacks and cladding |
| Use | Worktops, splashbacks, cabinet fronts, walls — outdoors too |
| Price | from €175/m² — final price depends on fabrication |
| Delivery | Delivery and installation in Finland — 14 working days from drawing approval |
Frequently asked questions
How much does a Laminam worktop cost?
Stocked colours start at €175/m²; I Naturali marble patterns typically sit between €250 and €450/m². Fixed quote within 24 hours.
Does Laminam tolerate heat?
Yes — hot pots can go straight onto the ceramic surface. This is ceramic’s clearest advantage over quartz composite.
Is a ceramic top fragile?
Ceramic is hard, but as a thin slab its edges are more impact-sensitive than thick quartz. Properly installed and supported it lasts for decades — installation is always part of our delivery.
What is Lucidato?
Lucidato is Laminam’s polished finish, deepening the marble pattern’s contrast. The same colour is often available matte too — both are in the catalogue.
Request a quote for a Laminam worktop
Tell us your measurements and colour wishes — fixed quote within 24 hours, measuring and installation in Finland included.
